-
Insulation Blankets Round Hook Base Stainless Steel Lacing Anchors With Dome Cap
Insulation Blankets Round Hook Base Stainless Steel Lacing Anchors With Dome Cap Technical data details of Stainless Steel Lacing Anchors anchor type head size pin diameter pin length material Min round head 22 mm 2mm, 2.2mm, 38mm - 203mm SS, MS round head 30 mm 2mm, 2.2mm, 2.7mm 100mm - 300mm SS, MS oblong head 20 x 25mm 2mm, 2.2mm 38mm - 203mm SS, MS The Lacing Anchor is a fabricated metal anchor consisting of a pin and tabbed or hooked washer Stainless steel is a popular
-
2mm Square Head Lacing Anchors 63mm Length With Self Locking Washers
2mm Square Head Lacing Anchors 63mm Length With Self Locking Washers Quick Details Of The 2mm Square Head Lacing Anchors: Square Head Lacing Anchors are used in the fabrication of insulation blankets or removable covers or pads. Item Square Head Lacing Anchors Factory Xiangyi Parts Material Stainless Steel Head Size 11x24mm Head Thickness 1.0mm Pin Diameter 2.0mm Pin Length 63mm Self Locking Washers 25mm, 30mm, 38mm etc. Specifications Of The Square Head Lacing Anchors 1.
-
Slim Style Stainless Steel Lacing Anchors To Secure Insulation Blanket
Slim Style Stainless Steel Lacing Anchors To Secure Insulation Blanket Quick Details Of The Slim Style Lacing Anchors: 1. it's a fabricated metal anchor consisting of a pin and tabbed or hooked washer. 2. stainless steel is a popular material while this type lacing anchors is also made in mild steel. 3. stamped "no ab" to denote 'no asbestos'. 4. the tabbed head is about 1" across, and 7/16" wide. 5. The nail can be 12 gauge or 14 gauge in pin diameter. 6. 2-1/2" & 4
-
30mm 25mm Kraft Paper Metal Round Base Duct Work Mild Steel Cup Head CD Weld Pins
30/25mm kraft paper metal round base mild steel cup head CD weld pins for HVAC duct insulation. Pin 12GA (2.7mm) or 14GA, base 30mm or 38mm, length 9.5-140mm. With/without kraft paper or plastic sleeve. Strong weld, corrosion resistant. Packed 1000-2000 pcs/carton. Custom sizes.
-
Corrosion Resistance Umbralla Base Copper CD Weld Pins For Fix Cement Roofing
Corrosion resistant umbrella base copper weld pin for cement roofing. Base dia 18mm, pin 1.5mm, length 20‑38mm. Soft copper wire bends easily; hard copper base locks firmly. Reduces jams, oversized head gives stronger welds. Custom designs available.
-
Stainless Steel Round Base Cup Head Weld Pins For HVAC System
Stainless steel round base cupped head weld pin for HVAC. Pin dia 2.7‑3.4mm, base 25‑30mm, length 15‑250mm. Zinc/copper plated. CD weld through insulation to sheet metal. For duct liner, blankets. Strong, corrosion resistant, temp 0‑287°C. Custom sizes.
-
Galvanized Steel 3/4 '' Cup Head Weld Pins For Heat Insulation Rock Wool
Galvanized steel 3/4″ cup head weld pins for heat insulation rock wool. Head 30‑38mm beveled edge, pin dia 2‑3.4mm, length 19‑63mm. CD weld directly through insulation to sheet metal. Faster welds, stronger, labor‑saving. Zinc/chromate plated. Packed 2000‑5000 pcs/carton.
-
1-1/8" Capped Cd Weld Pins Fasten Insulation To Inside Of Sheet Metal Air Ducts
1-1/8″ capped CD weld pins for fastening insulation inside sheet metal air ducts. Galvanized steel, 30mm beveled head, 2.7mm pin diameter. For use with CD welder. Fits 12‑100mm insulation. Labor‑saving for commercial duct liner fabrication. Packed 2000‑5000 pcs per carton.
