-
10ga Copper/Zinc Plating Mild Steel CD Spot Welding Pins With Dome Cap Washer
10ga Copper/Zinc Plating Mild Steel CD Spot Welding Pins With Dome Cap Washer Mild Steel CD Welding Pins Product Information The CD copper coating weld pin is a capacitor discharge weld insulation fastener, these insulation weld pins work with a stud welding machine, weld the pins on the sheet metal, then put the insulation material through the weld pins, press a self locking washer or metal clips or dome caps onto the pin, bend over or clip off the pin to finish fastening
-
Stainless Steel 304 Lacing Anchors Without Pins Lacing Hook & Washer & Ring
SS lacing anchors without pins: hook, washer & ring. 304/316, hook base 22mm×1mm, washer dia 25/30mm×0.4mm, D‑ring 30x25mm (3.0mm wire). Use with lacing wire for removable insulation blankets. Also two‑hole tops. Custom sizes.
-
Copper Coating Mild Steel Cd Stud Welding Insulation Pins 4x245mm
Copper Coating Mild Steel CD Stud Welding Insulation Pins 4x245mm Quick Details Of The CD Stud Welding Insulation Pins Capacitor Discharge (CD) Weld Pins are widely used to fix fiber heat insulator which is intended to relatively low temperature in the duct or cabin etc. Low carbon steel (3～6mm) is used for stud considering weldability and workability. Generally speed washer is used to fix heat insulator. Factory Hebei Xiangyi Metal Product Co.,Ltd Name Copper Coating Mild
-
Removable Blankets Lacing Anchors Hooks Washers With Two Holes
Removable blankets lacing anchors hooks & washers with two holes. Stainless steel 304/316. Head 7/8″, hook 5x11mm. Pin dia 14ga (2.0mm) or 12ga (2.7mm), length 1.5-2.5″. Used with tie wire to lace blankets. Also quilting pins, D/O rings. For insulation removable pads.
-
35mm Perforated Base Insulation Metal Plugs For Fixing Building Boards
Insulation metal plugs with 35mm perforated base. Galvanized or stainless steel, 0.7mm base, 8mm pin, length 50‑230mm. For fixing glass wool, rock wool, PU, polystyrene to concrete, brick, stone. 250pcs/box. Suitable for 20‑150mm insulation thickness. Custom lengths available.
-
Galvanized Steel 2'' x 1 1/2'' Perofated Impaling Clips For Rock Wool Installtion
Galvanized steel perforated impaling clips for rock wool installation. 2″×1.5″ size, 1mm plate thickness. Use screws to fasten to surface, then press acoustic panel with adhesive. 8 nails per clip. For rigid fiberglass panels on walls. Custom sizes. Packed 200‑500 pcs/carton.
-
4mm Capacitor Discharge CD Weld Pins For Shipbuilding Industry
4mm Capacitor Discharge CD Weld Pins For Shipbuilding Industry Quick Details Of The Capacitor Discharge (CD) Weld Pins: Capacitor Discharge (CD) Weld Pins are widely used in the shipbuilding industry. Shipbuilding industry is the industry which initiated stud welding. A lot of studs are adopted for fixing wood deck to steel deck, fixing porthole and hatch, fixing piping and wiring, and insulation etc. Length 10mm - 475mm Diameter 1.0mm - 5.0mm Material Stainless steel, mild
-
Fire Resisting Insulation Ductwork Cup Head Pin For Welding Rock Wool On Metal Sheet
Fire Resisting Insulation Ductwork Cup Head Pin For Welding Rock Wool On Metal Sheet Specification of Ductwork Cup Head Pin standard types details of standardFor US, Canadathe standard washer diameter is 1.187"(30mm), the pin diameter is 12GA(2.7mm), the washer can with or without kraft paper. the length from 3/8" to 4-7/8" For EU countriesthe washer diameter is 30mm, 38mm, The pin diameter is 12GA(2.7mm) and 14GA(2.0mm).notedthe washer can with or without kraft paper, the
